Debian jessie lxc vpn

https://www.digitalocean.com/community/tutorials/how-to-set-up-an-openvpn-server-on-debian-8

im container

mdir /dev/net
mknod /dev/net/tun c 10 200
chmod 0666 /dev/net/tun
apt-get install openvpn

echo 1 > /proc/sys/net/ipv4/ip_forward
vim  /etc/sysctl.conf
net.ipv4.ip_forward=1
ufw allow 1194/udp

packete installieren

apt-get install openvpn

apt-get install ufw
ufw allow ssh

vim /etc/default/ufw
DEFAULT_FORWARD_POLICY="ACCEPT"

vim /etc/ufw/before.rules (vor Zeile # Don't delete these required lines, otherwise there will be errors)

# START OPENVPN RULES
# NAT table rules
*nat
:POSTROUTING ACCEPT [0:0]
# Allow traffic from OpenVPN client to eth0
-A POSTROUTING -s 10.8.0.0/8 -o eth0 -j MASQUERADE
COMMIT
# END OPENVPN RULES



# Don't delete these required lines, otherwise there will be errors
*filter

cp -r /usr/share/easy-rsa/ /etc/openvpn

mkdir /etc/openvpn/easy-rsa/keys
cd /etc/openvpn/easy-rsa

./build-ca ./clean-all

./build-key-server server

 vim /etc/openvpn/easy-rsa/keys/clientname.ovpn 

 remote your_server_ip 1194


 #und am Ende einfügen:

<ca>
{Inhalt aus ca.crt}
</ca>
<cert>
{Inhalt aus clientname.crt}
</cert>
<key>
{Inhalt aus clientname.key}
</key>