Linux helper: Unterschied zwischen den Versionen
Aus Vosp.info
F (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „== mount external disk == '''0. connect to root and watch the results without connecting the hard disk''' <source lang="bash"> # show the connected usb devices l…“) |
F (Diskussion | Beiträge) (→mount external disk) |
||
Zeile 28: | Zeile 28: | ||
Device Boot Start End Blocks Id System | Device Boot Start End Blocks Id System | ||
− | /dev/sdb1 63 976768064 488384001 83 Linux | + | /dev/sdb1 63 976768064 488384001 83 Linux |
+ | </source> | ||
+ | |||
+ | '''3. mount the new device /dev/sdb1 for using'''' | ||
+ | <source lang="bash"> | ||
+ | # create | ||
+ | mkdir /media/sdb1 | ||
+ | mount /dev/sdb1 /media/sdb1 | ||
</source> | </source> |
Version vom 23. Juli 2013, 08:58 Uhr
mount external disk
0. connect to root and watch the results without connecting the hard disk
# show the connected usb devices
lsusb
# show the connected harddisks and list partition table(s)
fdisk -l
1. connect external disk on the computer
2. look again the results from lsusb and fdisk -l
lsusb
...
Bus 006 Device 003: ID 0123:4567 ASMedia Technology Inc. ASMedia 2105 SATA bridge
Bus 006 Device 001: ID 0123:4568 Linux Foundation 2.0 root hub
...
fdisk -l
...
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x123456
Device Boot Start End Blocks Id System
/dev/sdb1 63 976768064 488384001 83 Linux
3. mount the new device /dev/sdb1 for using'
# create
mkdir /media/sdb1
mount /dev/sdb1 /media/sdb1