Etherpad lite

• https://de.wikipedia.org/wiki/Etherpad

minimal installation

• https://github.com/ether/etherpad-lite#installation

apt install gzip git curl python libssl-dev pkg-config build-essential
curl -sL https://deb.nodesource.com/setup_9.x | sudo -E bash -
sudo apt-get install -y nodejs
git clone https://github.com/ether/etherpad-lite.git && cd etherpad-lite 


# für den export !!! 
apt-get install abiword

# zum testen, ansich nicht als root
bin/run.sh
# und dann im Browser http://127.0.0.1:9001/

npm ... extensions

npm init
npm i ep_fileupload
# weitere siehe unten

mit apache ansprechen

• https://github.com/ether/etherpad-lite/wiki/How-to-put-Etherpad-Lite-behind-a-reverse-Proxy#apache

• /etc/apache2/sites-available/pad.domain.tld.conf

<VirtualHost *:80>
        ServerName  pad.domain.tld
        ServerAlias www.pad.domain.tld
        ServerAdmin webmaster@localhost
        Redirect permanent / https://pad.domain.tld/
</VirtualHost>


<IfModule mod_ssl.c>
    <VirtualHost *:443>
        ServerName pad.domain.tld
        ServerAlias www.pad.domain.tld

        # SSL configuration
        SSLEngine on
        # If you hold wildcard certificates for your domain the next two lines are not necessary.
        SSLCertificateFile /etc/ssl/private/nc/SSLCertificateFile.crt
        SSLCertificateKeyFile /etc/ssl/private/nc/SSLCertificateKeyFile.key
        # nc bof
        SSLCertificateChainFile /etc/ssl/private/nc/SSLCertificateChainFile.cer
        SetEnv nokeepalive ssl-unclean-shutdown
        # nc eof
        
        ProxyVia On
        ProxyRequests Off
        ProxyPreserveHost on    

        # wenn zielserver https ist (etherpad-lite/settings.json ssl bereich!!!!) dann 
        SSLProxyEngine On

        <Location />
            AuthType Basic
            AuthName "Welcome to the domain.org Etherpad"
            AuthUserFile /etc/htpasswd/htpasswd_nc
            Require valid-user
            ProxyPass http://localhost:9001/ retry=0 timeout=30
            ProxyPassReverse http://localhost:9001/
        </Location>
        <Location /socket.io>
            # This is needed to handle the websocket transport through the proxy, since
            # etherpad does not use a specific sub-folder, such as /ws/ to handle this kind of traffic.
            # Taken from https://github.com/ether/etherpad-lite/issues/2318#issuecomment-63548542
            # Thanks to beaugunderson for the semantics
            RewriteEngine On
            RewriteCond %{QUERY_STRING} transport=websocket    [NC]
            RewriteRule /(.*) ws://localhost:9001/socket.io/$1 [P,L]
            ProxyPass http://localhost:9001/socket.io retry=0 timeout=30
            ProxyPassReverse http://localhost:9001/socket.io
        </Location>
        
        <Proxy *>
            Options FollowSymLinks MultiViews
            AllowOverride All
            Order allow,deny
            allow from all
        </Proxy>
    </VirtualHost>
</IfModule>

a2enmod proxy proxy_http
systemctl restart apache2

Konfiguration

nach folgendend die entscheidenen Einstellungen

ssl

• Wichtig ist hier das der ausführende Nutzer lese berechtigung hat

  "ssl" : {
            "key"  : "/etc/ssl/private/ssl.key",
            "cert" : "/etc/ssl/private/ssl.crt",
            "ca": ["/etc/ssl/private/ssl.cer"]
          },

mysql

• https://github.com/ether/etherpad-lite/wiki/How-to-use-Etherpad-Lite-with-MySQL

create database dbname;
create user 'dbuser'@'localhost' identified by 'dbpasswd';
grant all on dbname.* to 'dbuser'@'localhost';

• etherpad-lite/settings.json

  "dbType" : "mysql",
  "dbSettings" : {
                   "user"    : "dbuser",
                   "host"    : "localhost",
                   "port"    : 3306,
                   "password": "dbpasswd",
                   "database": "dbname",
                   "charset" : "utf8mb4"
                 },

Benutzer Rechte

 "requireSession" : false,
  "sessionNoPassword" : true,
  "requireAuthentication" : false, // wichtig, macht sonst mit mypads probleme
  "requireAuthorization" : true,

  "users": {
    "admin": {
      // "password" can be replaced with "hash" if you install ep_hash_auth
      "password": "changeMe",
      "is_admin": true
    },
 },

abiword

• wichtig. abiword muss natürlich mit apt-get installiert sein
  • achtung: funktioniert nicht mit ep_font_size

  "abiword" : "/usr/bin/abiword",

linux system daemon

• https://github.com/ether/etherpad-lite/wiki/How-to-deploy-Etherpad-Lite-as-a-service#debian-8-jessie--systemd

Installed plugins (tested)

• ep_adminpads@0.0.12
• ep_align@0.0.23
• ep_authorship_toggle@0.0.3
• ep_chatdate@1.0.0
• ep_colors@0.0.3
• ep_comments_page@0.0.35
• ep_fileupload@0.0.10
• ep_font_family@0.2.7
• ep_message_all@1.0.0
• ep_mypads@1.6.2
• ep_page_view@0.5.24
• ep_printer@0.0.2
• ep_sync_status@0.0.1

problem plugins

• ep_font_size@0.1.11
  • macht Probleme beim export mit abiword
    • https://github.com/ether/etherpad-lite/issues/2915

Quellen

• http://raphael.kallensee.name/journal/etherpad-lite-auf-ubuntu-server-apache-upstart/