CentOS 7 OPSI: Unterschied zwischen den Versionen
Aus Vosp.info
HK (Diskussion | Beiträge) |
HK (Diskussion | Beiträge) |
||
| Zeile 16: | Zeile 16: | ||
yum install lxc (epel) | yum install lxc (epel) | ||
| + | |||
| + | Bridges | ||
| + | vim /etc/sysconfig/network-scripts/ifcfg-br0 | ||
| + | |||
| + | DEVICE=br0 | ||
| + | TYPE=Bridge | ||
| + | |||
| + | DEFROUTE=yes | ||
| + | IPV4_FAILURE_FATAL=no | ||
| + | IPV6INIT=yes | ||
| + | IPV6_AUTOCONF=yes | ||
| + | IPV6_DEFROUTE=yes | ||
| + | IPV6_FAILURE_FATAL=no | ||
| + | IPV6_PEERDNS=yes | ||
| + | IPV6_PEERROUTES=yes | ||
| + | |||
| + | |||
| + | IPADDR0=10.0.10.1 | ||
| + | NETMASK=255.255.255.0 | ||
| + | |||
| + | ONBOOT=yes | ||
| + | BOOTPROTO=none | ||
| + | NM_CONTROLLED=no | ||
| + | DELAY=0 | ||
| + | STP=yes | ||
Version vom 18. März 2015, 17:40 Uhr
Installation vom ISO in eine VirtualBox 4.13.8 Debian Jessie
- Partitionierung
- Manuell auswählen
- /boot : 250M, ext4
- / im LVM: 7 GB, ext4
- volume group maximieren
- Manuell auswählen
systemctl start sshd
hostname set-hostname <hostname>
yum install vim wget net-tools
rpm -Uhv http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-5.noarch.rpm
yum install lxc (epel)
Bridges
vim /etc/sysconfig/network-scripts/ifcfg-br0
DEVICE=br0 TYPE=Bridge DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPADDR0=10.0.10.1 NETMASK=255.255.255.0 ONBOOT=yes BOOTPROTO=none NM_CONTROLLED=no DELAY=0 STP=yes
