Apcupsd: Unterschied zwischen den Versionen
Aus Vosp.info
V (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „ == Grundbefehle == === Installieren === ==== Basis ==== <source lang=shell> apt-get install apcupsd </source> ==== Webzugang (Optional) ==== <source lang=sh…“) |
V (Diskussion | Beiträge) (→/etc/apcupsd/apcupsd.conf) |
||
| (Eine dazwischenliegende Version desselben Benutzers wird nicht angezeigt) | |||
| Zeile 82: | Zeile 82: | ||
KILLDELAY 0 | KILLDELAY 0 | ||
NETSERVER on | NETSERVER on | ||
| − | NISIP | + | NISIP 0.0.0.0 #allow remote connections |
NISPORT 3551 | NISPORT 3551 | ||
EVENTSFILE /var/log/apcupsd.events | EVENTSFILE /var/log/apcupsd.events | ||
| Zeile 108: | Zeile 108: | ||
== Second HOST 192.168.0.2 (Über Ethernet mit main verbunden == | == Second HOST 192.168.0.2 (Über Ethernet mit main verbunden == | ||
| − | /etc/apcupsd/apcupsd.conf | + | |
| + | === /etc/apcupsd/apcupsd.conf === | ||
<source lang=shell> | <source lang=shell> | ||
UPSNAME USVSecondHost | UPSNAME USVSecondHost | ||
Aktuelle Version vom 3. Mai 2022, 13:58 Uhr
Inhaltsverzeichnis
Grundbefehle
Installieren
Basis
apt-get install apcupsd
Webzugang (Optional)
apt-get install apcupsd-cgi apache2
a2enmod cgi
Aufzurufen unter: http://192.168.0.1/cgi-bin/apcupsd/multimon.cgi
Starten
# systemctl restart apcupsd.service
Status
MAINHOST# apcaccess status
...
CABLE : USB Cable
DRIVER : USB UPS Driver
UPSMODE : Stand Alone
MODEL : Smart-UPS_1000
STATUS : ONLINE
BCHARGE : 100.0 Percent
TIMELEFT : 27.0 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
ALARMDEL : No alarm
BATTV : 26.4 Volts
...
SECONDHOST# apcaccess status
...
CABLE : Ethernet Link
DRIVER : NETWORK UPS Driver
UPSMODE : Stand Alone
MASTER : 192.168.0.1:3551
MODEL : Smart-UPS_1000
STATUS : ONLINE SLAVE
BCHARGE : 100.0 Percent
TIMELEFT : 23.3 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
BATTV : 26.4 Volts
NUMXFERS : 0
TONBATT : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
NOMBATTV : 24.0 Volts
...
Main Host 192.168.0.1 (über USB an USV)
/etc/apcupsd/apcupsd.conf
UPSNAME USVMainHost
UPSCABLE usb
UPSTYPE usb
DEVICE
POLLTIME 60
LOCKFILE /var/lock
SCRIPTDIR /etc/apcupsd
PWRFAILDIR /etc/apcupsd
NOLOGINDIR /etc
ONBATTERYDELAY 30
BATTERYLEVEL 5
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISIP 0.0.0.0 #allow remote connections
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
UPSCLASS standalone
UPSMODE disable
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0
/etc/apcupsd/hosts.conf
MONITOR 127.0.0.1 "Local Host"
MONITOR 192.168.0.2 "Second HOST"
/etc/default/apcupsd
ISCONFIGURED=yes
Second HOST 192.168.0.2 (Über Ethernet mit main verbunden
/etc/apcupsd/apcupsd.conf
UPSNAME USVSecondHost
UPSCABLE ether
UPSTYPE net
DEVICE 192.168.0.1:3551
POLLTIME 10
LOCKFILE /var/lock
SCRIPTDIR /etc/apcupsd
PWRFAILDIR /etc/apcupsd
NOLOGINDIR /etc
ONBATTERYDELAY 30
BATTERYLEVEL 5
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISIP 0.0.0.0
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
UPSCLASS standalone
UPSMODE disable
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0
