LEDE: Unterschied zwischen den Versionen

Aus Vosp.info
Wechseln zu:Navigation, Suche
 
(30 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
 +
Router: [[Openwrt]] | [[LEDE]] | [[Libre Mesh]] | [[qMp]]
 +
 +
= Befehle =
 +
<source lang=bash>
 +
 +
# Netzwerkkonifguration anzeigen
 +
uci show network
 +
uci show wireless
 +
uci show firewall
 +
 +
# routen ausgeben
 +
ip route
 +
 +
# wlan  scannen
 +
iwinfo wlan0 scan
 +
iwinfo
 +
 +
iw wlan0 info
 +
iw wlan0 scan dump
 +
iw wlan0 mpp dump
 +
iw wlan0 mpath dump
 +
iw wlan0 station dump
 +
iw wlan0 survey dump
 +
 +
# Netzwerkprogramm iftop
 +
opkg install iftop
 +
iftop
 +
</source>
 +
 +
= Installation =
 +
== Installatioin auf TL-WR1043ND v4.x ==
 +
* https://lede-project.org/toh/hwdata/tp-link/tp-link_tl-wr1043nd_v4
 +
* https://lede-project.org/toh/start Table of Hardware
 +
* https://wiki.openwrt.org/toh/tp-link/tl-wr1043nd Installation anleitung
 +
* download
 +
 +
<source lang=bash>
 +
 +
wget http://downloads.lede-project.org/releases/17.01.2/targets/ar71xx/generic/lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-factory.bin
 +
wget http://downloads.lede-project.org/releases/17.01.2/targets/ar71xx/generic/lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin
 +
 +
# sysupgrade alternativ beim ersten mal factory.bin nutzen
 +
scp lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin root@192.168.10.1:/tmp/
 +
ssh root@192.168.10.1
 +
sysupgrade  -n lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin
 +
 +
</source>
 +
 
= Adblock =
 
= Adblock =
 +
 +
<source lang=bash>
 +
opkg install adblock
 +
opkg install luci-app-adblock
 +
</source>
 +
 
==Manuell==
 
==Manuell==
 
https://blog.doenselmann.com/werbung-direkt-auf-openwrt-router-blocken/
 
https://blog.doenselmann.com/werbung-direkt-auf-openwrt-router-blocken/
Zeile 12: Zeile 66:
 
  https://yro.slashdot.org/story/15/08/26/225239/how-to-keep-microsofts-nose-out-of-your-personal-data-in-windows-10
 
  https://yro.slashdot.org/story/15/08/26/225239/how-to-keep-microsofts-nose-out-of-your-personal-data-in-windows-10
  
 +
=== Block Files von irgenwelchen ... ===
 +
http://someonewhocares.org/hosts/
 +
 +
= Hardware =
 +
== Ubiquiti Unifi | AP AC Lite ==
 +
* Firmware durch Lede erseztzen
 +
** Anschluss des AP AC LITE an einen Router
 +
 +
nmap  -sP 192.168.1.1/24
 +
Nmap scan report for 192.168.1.104
 +
Host is up (-0.095s latency).
 +
MAC Address: F0:9F:C2:7C:2F:C8 (Ubiquiti Networks)
 +
 +
ssh ubnt@192.168.1.104
 +
pw: ubnt
 +
 +
** Download:
 +
https://downloads.lede-project.org/releases/17.01.2/targets/ar71xx/generic/
 +
* ubnt-unifiac-lite-squashfs-sysupgrade.bin
 +
 +
 +
** Image kopieren
 +
scp lede-17.01.2-ar71xx-generic-ubnt-unifiac-lite-squashfs-sysupgrade.bin  ubnt@192.168.1.104:/tmp/
 +
ssh  ubnt@192.168.1.104:/tmp/
 +
BZ.v3.4.14#
 +
** Beide Befehle hintereinander ausführen!!!
 +
mtd write /tmp/lede-17.01.2-ar71xx-generic-ubnt-unifiac-lite-squashfs-sysupgrade.bin  kernel0
 +
mtd -r write /tmp/lede-17.01.2-ar71xx-generic-ubnt-unifiac-lite-squashfs-sysupgrade.bin kernel1
 +
 +
Die Verbindung wird unterbrochen Login in Lede:
  
=VPN =
+
  ssh root@192.168.1.1
==Anleitungen==
 
  https://blog.doenselmann.com/openvpn-server-auf-openwrt-router-betreiben/
 
http://www.kammerath.net/openwrt-mit-openvpn-client.html
 

Aktuelle Version vom 20. April 2020, 09:10 Uhr

Router: Openwrt | LEDE | Libre Mesh | qMp

Befehle

# Netzwerkkonifguration anzeigen
uci show network
uci show wireless
uci show firewall

# routen ausgeben
ip route

# wlan  scannen
iwinfo wlan0 scan
iwinfo

iw wlan0 info
iw wlan0 scan dump
iw wlan0 mpp dump
iw wlan0 mpath dump
iw wlan0 station dump
iw wlan0 survey dump

# Netzwerkprogramm iftop
opkg install iftop
iftop

Installation

Installatioin auf TL-WR1043ND v4.x

wget http://downloads.lede-project.org/releases/17.01.2/targets/ar71xx/generic/lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-factory.bin
wget http://downloads.lede-project.org/releases/17.01.2/targets/ar71xx/generic/lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin

# sysupgrade alternativ beim ersten mal factory.bin nutzen
scp lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin root@192.168.10.1:/tmp/
ssh root@192.168.10.1
sysupgrade  -n lede-17.01.2-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin

Adblock

opkg install adblock
opkg install luci-app-adblock

Manuell

https://blog.doenselmann.com/werbung-direkt-auf-openwrt-router-blocken/

Direkt vom Router

wget --no-check-certificate https://gist.githubusercontent.com/teffalump/7227752/raw/af7d3d365426731015e99698a93e1a072a7da4ba/adblock.sh

mit opkg

https://github.com/openwrt/packages/tree/master/net/adblock/files

speziell z.B Windows updates

https://github.com/crazy-max/WindowsSpyBlocker
https://yro.slashdot.org/story/15/08/26/225239/how-to-keep-microsofts-nose-out-of-your-personal-data-in-windows-10

Block Files von irgenwelchen ...

http://someonewhocares.org/hosts/

Hardware

Ubiquiti Unifi | AP AC Lite

  • Firmware durch Lede erseztzen
    • Anschluss des AP AC LITE an einen Router
nmap  -sP 192.168.1.1/24
Nmap scan report for 192.168.1.104
Host is up (-0.095s latency).
MAC Address: F0:9F:C2:7C:2F:C8 (Ubiquiti Networks)
ssh ubnt@192.168.1.104

pw: ubnt

    • Download:
https://downloads.lede-project.org/releases/17.01.2/targets/ar71xx/generic/
  • ubnt-unifiac-lite-squashfs-sysupgrade.bin


    • Image kopieren
scp lede-17.01.2-ar71xx-generic-ubnt-unifiac-lite-squashfs-sysupgrade.bin  ubnt@192.168.1.104:/tmp/
ssh  ubnt@192.168.1.104:/tmp/

BZ.v3.4.14#

    • Beide Befehle hintereinander ausführen!!!
mtd write /tmp/lede-17.01.2-ar71xx-generic-ubnt-unifiac-lite-squashfs-sysupgrade.bin  kernel0
mtd -r write /tmp/lede-17.01.2-ar71xx-generic-ubnt-unifiac-lite-squashfs-sysupgrade.bin kernel1

Die Verbindung wird unterbrochen Login in Lede:

ssh root@192.168.1.1