Lineage: Unterschied zwischen den Versionen

Aus Vosp.info
Wechseln zu:Navigation, Suche
(Die Seite wurde neu angelegt: „== Installation von LineageOS auf kccat6 == * https://wiki.lineageos.org/devices/kccat6/install * https://download.lineageos.org/kccat6 Grundsätzlich funkt…“)
(kein Unterschied)

Version vom 10. Oktober 2019, 17:56 Uhr

Installation von LineageOS auf kccat6

Grundsätzlich funktioniert die Anleitung, es gibt nur paar Punkte auf die mensch achten muss

  • heimdall version v1.4.2 !!!! nicht v1.4.1 (im zweifel irgendwo im netz suchen)
  • beim starten im "Donwload Mode" (Volume Down + Home + Power) unbedingt das usb Kabel erst nach der Bestätigung (Volum Up) einstecken
  • apt-get install adb android-libadb android-tools-adb
  • nach dem Installieren von lineagos, nicht das angebotene twrp mit installieren!


  1. Preparing for installation
    1. Download and install the Heimdall suite:
apt-get install heimdall-flash heimdall-flash-frontend
apt-get install adb  android-libadb android-tools-adb
    1. Power off the device and connect the USB adapter to the computer (but not to the device, yet).
    2. Boot into download mode:
    • With the device powered off, hold Volume Down + Home + Power. In order to exit download mode and reboot, hold Volume Down + Power for about 7 seconds.
    • Accept the disclaimer, then insert the USB cable into the device.
    1. On the computer, open a command prompt window, and type: heimdall print-pit
    2. If the device reboots, Heimdall is installed and working properly.